New Installation Manual! 24 Months Parts Warranty!
- Combo (Symmetrical and Asymmetrical) Arm Assembly with Screw-in Pads!
- CE Certified Lift Structure and Hydraulic System
- 6’9″ Lift Height Maximum with Truck Adapters
- Durable Powder Coated Finish on Steel
- All Robot Welded Structure
- Double Seal Rings Protecting PU Material
- Carriage Material Q355, Stronger Than Normal Q235 Steel
Sorry we do not provide liftgate service, as car lift package is too long to use liftgate.
Each shipment has a tracking number. Please note that delivery time is estimated but not guaranteed.
Full Details of the Product Can Be Found on Manufacturer’s Website.
APlusLift HW-10KOH-A car lift (auto hoist) is one of the most affordable overhead car lifts built with quality materials and good workmanship. The lift has a strong double “S” column design to support 10,000 LB capacity. It is upgraded with thicker steel for stronger support (Column Steel upgraded to 13/64″ from 11/64″; Carriage and Arm Steel upgraded to 15/64″ from 3/16″; Carriage yoke upgraded to 9/16″ from 15/64″)
We confidently offer a 2 years warranty for all the lift parts. This lift, especially the cylinder sealing parts, will last for a long time. We have all replacement and optional parts available. And we welcome suggestions to improve our products and service!
All warranty and repair parts are available.
Specification and Features
- Heavy Duty Design:
- Column Steel Thickness: 13/64″
- Carriage Steel Thickness: 15/64″
- Arm Steel Thickness: 15/64″
- Carriage Yoke Thickness: 5/16″
- Base Plate Steel Thickness: 5/8″
- Driving Mode: Dual hydraulic cylinders, chain drive
- Lifting Capacity: 10,000 LB
- Combo (Symmetrical and Asymmetrical) Arm Assembly:
- Straight Front/Rear 3 Stage reach from 22 7/8″ to 42 5/8″
- Straight Rear 2 Stage reach from 33 5/8″ to 52 7/8″
- Screw-in pads 4 pieces included
- Truck adapters 4 pieces included
- Safety Mechanism:
- Double point safety lock release
- Automatic arm lock restraints
- Relief valve built in power pump to prevent overloading
- Door guards protection rubber
- Up-limit switch to protect cylinders working stroke used in safe length scope
- Heavy duty 3/8″ diameter cable and 5″ pulley that reduce high stress on synchronization process and increase cable life
- Ultra high molecular self lubricating nylon slider that ensures carriage smooth moving up and down
- Control System:
- Lifting operation by pressing “UP” button on motor
- Manual lowering operation by pressing lever
- Relief valve built in power pump to prevent overloading
- Overall Height: 143 3/16″
- Overall Width: 134 5/16″
- Minimum Height of Arm Top: 4″
- Maximum Lift height with Truck Adapters: 81″
- Maximum Lift height without Truck Adapters: 75″
- Carriage to Carriage Width (Drive through clearance): 100″
- Column to Column Width: 109″
- Column Cross Section: 11″L x 7″W
- Time to full rise: 50 sec
- Motor: 220V Single Phase 3HP 10A (recommend a 30A breaker)
- Hydraulic Oil (not included): 3-5 gallons AW32/AW46
- Concrete Requirement: 6″ thick at 3500 psi reinforced with fiberglass or steel (4″ thick for vehicles 9000LB and below)
- Anchor bolts/mounting hardware included
- Tool trays and toe guards included
- Shipping Weight: 1,450 LB
- Shipping package size: 113″L x 22″W x 40″H
- Installation Manual
Reviews
There are no reviews yet.