Legal Disclaimer
A 2-post car lift package is over 9.5 foot long. It CANNOT be unloaded with liftgate. Customer MUST have a forklift or similar equipment to unload the lift from freight truck. Delivery is on paved road only. Customers may pick up the lift at a nearby freight terminal. Please contact us for a terminal address. Package must be signed and received by an adult. Additional charges may apply for delayed delivery (cannot accept delivery or pick up from the terminal for over a week) or delivery in remote areas (e.g. Key West, FL) or high cost areas (e.g. Manhattan, NY). No delivery inside a building or to a backyard. All Returns are subject to a 10% restocking fee. We do warranty for replacement parts only. There is no labor warranty on this product.
Product Description
APlusLift HW-10KBP is one of the most affordable floor plate car lift (auto hoist) with 10,000 LB Heavy Duty and Strong Double “S” Column Design.
Specification
- CE Certified Lift Structure and Hydraulic System
- Heavy Duty Design:
-
- Column Steel Thickness: 13/64″
- Carriage Steel Thickness: 15/64″
- Arm Steel Thickness: 15/64″
- Carriage Yoke Thickness: 5/16″
- Driving Mode: Dual hydraulic cylinders, chain drive
- Combo (Symmetrical and Asymmetrical) Arm Assembly:
-
- Front/Rear 3 Stage reach from 22 7/8″ to 42 5/8″
- Rear 2 Stage reach from 33 5/8″ to 52 7/8″
- Screw-in pads 4 pieces included
- Truck adapters 4 pieces included
- Safety Mechanism:
-
- Double point safety lock release
- Automatic arm lock restraints
- Relief valve built in power pump to prevent overloading
- Door guards protection rubber
- Up-limit switch to protect cylinders working stroke used in safe length scope
- Heavy duty 3/8″ diameter cable and 5″ pulley that reduce high stress on synchronization process and increase cable life
- Stiffened base plate 5/8″ thickness
- Control System:
-
- Lifting operation by pressing “UP” button on motor
- Manual lowering operation by pressing lever
- Relief valve built in power pump to prevent overloading
- Overall Height: 113 5/8″
- Overall Width: 134 5/16″
- Maximum Lift height with Truck Adapters: 81″
- Maximum Lift height without Truck Adapters: 75″
- Minimum Height of Arm Top: 4″
- Carriage to Carriage Width (Drive-through clearance): 100″
- Column to Column Width: 109″
- Time to full rise: 50 sec
- Motor: 220V Single Phase 3HP 10A(recommend a 30A breaker)
- Hydraulic Oil: 3-5 gallons AW32/AW46
- Concrete Requirement: 6″ at 3500 psi (4″ for vehicles 9000LB and below)
- Anchor bolts included
Reviews
There are no reviews yet.